Technical Data
Specification
The MBT-700 will be delivered incl. the following standard accessories:
1 x ATC probe,
each 1 x 500 ml Buffer solution pH 4,01, pH 7,00
1 x AC adaptor,
1 x operating manual,
1 x flexible electrode holder
| Conductivity K = 0,475 | ||
| Range | Resolution | Accuracy |
| 0,0 to 475µS/cm | 0,1µS/cm | ±0,5% Full Scale |
| 475 to 4750µS/cm | 1µS/cm | ±0,5% Full Scale |
| 4,75 to 47,50mS/cm | 0,01mS/cm | ±0,5% Full Scale |
| 47,5 to 200,0mS/cm | 0,1mS/cm | ±0,5% Full Scale |
| Conductivity K = 0,1 | ||
| Range | Resolution | Accuracy |
| 0.00 to 99,99µS/cm | 0,01µS/cm | ±0,5% Full Scale |
| 100 to 200µS/cm | 0,1µS/cm | ±0,5% Full Scale |
| TDS | ||
| TDS Range | Resolution | Accuracy |
| 0,001mg/l to 200,0g/l | 0,01/0,1/1mg/l | ±0,5% Full Scale
0.01/0,1 g/l |
| Salinity | ||
| Salinity Range | Resolution | Accuracy |
| 0.0 to 80,0 ppt | 0,1 ppt | ±0,5 % Full Scale |
| mV | ||
| mV Range | Resolution | Accuracy |
| -1999,9 to 1999,9 mV | 0,01 mV | ±0,05% Full Scale |
| Specification: | |
| Conductivity Calibration: | 1 point in each range |
| ATC | Auto / manual 0,0 to 120°C |
| Input impedance: | >3×10 |
| Temperature sensor: | Thermistor, 10K ohms at 25°C |
| Memory: | When the unit is connected to a bluetooth device, the user can store data into the device that meets GLP requirements |
| pH electrode connection: | BNC |
| Conductivity cell connection: | 8 PIN connector |
| Connectivity: | Bluetooth |
| Power requirement: | 6 x 1,5 Volt AAA Alkaline batteries or AC adaptor |
| Dimensions (LxWxH): | 210 x 150 x 45 mm |
